Coaxial Cable
|
Let The R. F. Connection's Research and Development Department build your cable assemblies for you. Call The Tech Line (301) 840-5477 or send mail to rfc@therfc.com for an estimate for your particular needs. |
For general cable attenuation ratings, check the Coaxial
Cable Attenuation Ratings Table.
For LMR cable attenuation
ratings, see the LMR
Coaxial Cable Attenuation Ratings.
For general cable power ratings, check the Coaxial
Cable Power Ratings Table.
For LMR cable power ratings, see
the LMR Coaxial Cable
Power Ratings.
|
RG-58/U |
20 AWG Cu solid center conductor with poly dielectric & type I jacket.Nominal impedance 53.5 Ohm; velocity of propagation 66%; outer diameter .195"; 98% tinned Cu copper braid. |
||
|
RG-58A/U |
19 strands .0071" tinned Cu center conductor with poly dielectric & type I jacket. nominal impedance 50 Ohm; velocity of propagation 65.9%; outer diameter .195"; 98% tinned Cu braid. |
||
|
RG-58C/U |
19 strands .0071" tinned Cu center conductor with poly dielectric & type II Black jacket. nominal impedance 50 Ohm; velocity of propagation 65.9%; outer diameter .195"; 98% tinned Cu braid. |
||
|
LMR-240 |
.059 center conductor with micro-cell foam dielectric & type IIIA non-contaminating jacket. Nominal impedance 50 Ohms, velocity of propagation 84%; outer diameter .240"; 100% Al mylar & 95% tinned Cu braid. |
||
|
3830 |
An LMR-240 equivalent, it has the same specification as above. Made by JSC in the United States. |
||
|
RG-8X(3060) |
16(19X29) stranded Cu center conductor with foam dielectric & extra-flexible jacket. Nominal Impedance 50 Ohm; velocity of propagation 78%; outer diameter .242"; 98% Cu braid. |
||
|
RG-8X/MARINE |
16(19X29) stranded tinned-Cu center conductor with foam dielectric & type IIA white marine jacket. Nominal Impedance 50 Ohm; velocity of propagation 78%; outer diameter .242"; 98% tinned Cu braid. |
||
|
RG-8X/IIA Jacket
w/Foil (9092-Plus) |
16(19X29) stranded Cu center conductor with foam dielectric & type IIA non-contaminating black jacket. Nominal Impedance 50 Ohm; Timed velocity of propagation 78%; outer diameter .242"; 98% Cu braid, 100% Foil Shield. |
||
|
RG-213/U |
13 (7x.0296) stranded Cu center conductor with poly dielectric & type IIA non-contaminating jacket. Nominal impedance 50 Ohm; velocity of propagation 65.9%; outer diameter .405"; 98% Cu braid. |
||
|
9086(9913
Equivalent) |
9.5 AWG solid center conductor, air dielectric & type I jacket. Nominal impedance 50 Ohm; velocity of propagation 84%; outer diameter .405"; 100% foil plus 98% tinned Cu braid. |
||
|
9096 EXTRAFLEX |
9.5 AWG stranded center conductor, air dielectric & type IIA non-contaminating jacket. Nominal impedance 50 Ohm; velocity of propagation 84%; outer diameter .405"; 100% foil plus 98% tinned Cu braid. Comes with 10 year factory warranty. |
||
|
9913F7 |
7 strands(0.109") Stranded Cu center conductor with high density, foam dielectric. Nominal impedence 50 Ohm; velocity of propagation 84%; outer diameter .405"; 100% foil plus 98% tinned Cu braid. Belaex jacket. |
||
|
RG-214/U
MIL |
13 (7x.0296) stranded Ag center conductor with poly dielectric & type IIA non-contaminating jacket. Nominal impedance 50 Ohm. Velocity of propagation 66%; outer diameter .405"; 2 layers 98% Ag/Cu braid. |
||
|
RG-214/COMM |
13 (7x.0296) stranded tinned center conductor with poly dielectric & type IIA non-contaminating jacket. Nominal impedance 50 Ohm. Velocity of propagation 66%; outer diameter .405"; 2 layers 98% Tinned/Cu braid. |
||
|
RG-393/U |
7 strands .0312" Ag-plated Cu center conductor with teflon dielectric & FEP-IX jacket. Nominal impedance 50 Ohms; velocity of propagation 69.5%; outer diameter .390"; 2 layers 98% Ag/Cu braid. |
||
|
RG-223/U |
solid .035" Ag-Cu center conductor with poly dielectric & type IIA non-contaminating jacket. Nominal impedance 50 Ohms, velocity of propagation 66%; outer diameter .216"; 2 layers 98% Ag/Cu braid. |
||
|
RG-217/U |
.106" solid center conductor with poly dielectric & type II A non-contaminating jacket. nominal impedance 50 Ohm; velocity of propagation 65.9%; outer diameter .545"; 98% Cu braid. |
||
|
RG-59/U-SP-95 |
#22 Stranded center conductor with poly dielectric & type IIA non-contaminating jacket. Nominal impedance 75 ohm; velocity of propagation 65.9%; outer diameter .242"; 98% Cu braid. |
||
|
LMR-195 |
20 AWG Cu solid center conductor with micro-cell foam dialectric & type IIIA jacket. Nominal impedance 50 Ohms; velocity of propagation 83%; Outer diameter.195; 100% AL Mylar tape & 85% tinned Cu braid. |
||
|
3850 |
ANDREW equivalent to LMR-195.It has the same specifications as above. |
||
|
LMR-200 |
.044 Cu solid center conductor with micro-cell foam dialectric & type IIIA jacket. Nominal impedance 50 Ohms; velocity of propagation 83%; Outer diameter .200; 100% Al Mylar tape & 85% tinned Cu braid. |
||
|
LMR-240UF |
.044 Cu stranded center conductor with micro-cell foam dialectric & type IIIA jacket. Nominal impedance 50 Ohms; velocity of propagation 83%; Outer diameter .200; 100% Al Mylar tape & 85% tinned Cu braid. |
|
|
|
LMR-400 |
.109" solid Cu-clad Al center conductor with micro-cell foam dielectric & type III A polyethylene jacket. Nominal impedance 50 Ohms; velocity of propagation 85%; outer diameter .405"; 100% Al mylar/95% tinned Cu braid. |
||
|
9096F |
An LMR-400 equivalent, it has the same specification as above. Made by IEWC in the United States. |
||
|
LMR-400UF |
.109" stranded Cu-clad Al center conductor with micro-cell foam dielectric & type III A polyethylene jacket. Nominal impedance 50 Ohms; velocity of propagation 85%; outer diameter .405"; 100% Al mylar/95% tinned Cu braid. |
||
|
LMR-400DB |
LMR400 Flooded Coax .109" stranded Cu-clad Al center conductor with micro-cell foam dielectric & type III A polyethylene jacket. Nominal impedance 50 Ohms; velocity of propagation 85%; outer diameter .405"; 100% Al mylar/95% tinned Cu braid. |
|
|
|
LMR-500 |
.142" solid Cu center conductor with micro-cell foam dielectric & type IIIA polyethylene jacket; nominal impedance 50 Ohms; velocity of propagation 86%;outer diameter .5";100% Al mylar/95% tinned Cu. |
||
|
LMR-600 |
.176" solid Cu-clad center conductor with micro-cell foam dielectric & type IIIA polyethylene jacket; nominal impedance 50 Ohms; velocity of propagation 87%;outer diameter .59";100% Al mylar/95% tinned Cu. |
||
|
LMR-600UF |
.176" stranded Cu-clad center conductor with micro-cell foam dielectric & type IIIA polyethylene jacket; nominal impedance 50 Ohms; velocity of propagation 87%;outer diameter .59";100% Al mylar/95% tinned Cu. |
||
|
LMR-900DB |
solid Cu center conductor with micro-cell foam dielectric & type IIIA polyethylene jacket; nominal impedance 50 Ohms; velocity of propagation 87%;outer diameter .870";100% Al mylar/95% tinned Cu. |
||
|
LMR-1200DB |
.349" solid Cu center conductor with micro-cell foam dielectric & type IIIA polyethylene jacket; nominal impedance 50 Ohms; velocity of propagation 88%;outer diameter 1.2";100% Al mylar/95% tinned Cu. |
||
|
LMR-1700DB |
.527" solid Cu center conductor with micro-cell foam dielectric & type IIIA polyethylene jacket; nominal impedance 50 Ohms; velocity of propagation 89%;outer diameter 1.670";100% Al mylar/95% tinned Cu. |
||
|
RG-11A(1205) |
7 strands 26 AWG tinned Cu center conductor with poly dielectric & type IIA non-contaminating jacket. Nominal impedance 75 Ohm; velocity of propagation 65.9%; outer diameter .405"; 98% Cu braid. |
||
|
RG-62A/U |
22 AWG solid Cu-clad center conductor with air dielectric & type IIA non-contaminating jacket. Nominal impedance 93 Ohm; velocity of propagation 84%; outer diameter .242" 95% Cu braid. |
||
|
RG-6/QUAD CATV |
.040 Cu-clad center conductor with foam dielectric & type I jacket. nominal impedance 75 Ohm; velocity of propagation 82%; outer diameter .300; Quad Al shielding:100% foil/50% braid 100% foil/50% braid. |
||
|
RG-142B/U |
18 AWG Ag-plated Cu-clad center conductor with teflon dielectric & jacket. Nominal impedance 50 Ohm; velocity of propagation 69.5%; outer diameter .195" 2 layers 98% Ag/Cu braid. |
||
|
RG-174/U |
7 strands .0063" Cu-clad center conductor with poly dielectric & type IIA non-contaminating jacket. Nominal impedance 50 Ohm; velocity of propagation 65.9% outer diameter .100"; 98% tinned Cu braid. |
||
|
LMR-100A-PVC |
.018 solid center conductor with poly dialectric & type IIIA jacket. Nominal impedance 50 Ohms; velocity of propagation 66%; outer diameter .100, 95% tinned braid & 100% foil. |
||
|
RG-316/U |
7 strands .0067" Ag-plated Cu-clad center conductor with teflon dielectric & jacket. Nominal impedance 50 Ohm; velocity of propagation 68.5%; outer diameter .110"; 98% Ag/Cu braid. |
||
|
RG-196A/U |
7 strands 28 AWG Ag-plated Cu-clad center conductor with teflon dielectric & jacket. Nominal impedance 50 Ohm; velocity of propagation 69.5%; outer diameter .080"; 98% Ag/Cu braid. |
||
|
RG-400/U |
19 strands .0077" Ag-plated Cu-clad center conductor with teflon dielectric & jacket. Nominal impedance 50 Ohm; velocity of propagation 69.5%; outer diameter .195"; 2 layers 98% Ag/Cu braid. |
||
|
Andrew
LDF4-50A |
Cu-clad Al center conductor w/low-loss closed cell foam dielectric, annular corrugated Cu outer conductor, type IIIA jacket. Nominal impedance 50 ohm; velocity of propagation 88%; outer diameter .63"; solid Cu shield. |
||
|
Andrew
LDF5-50A |
Cu-clad Al center conductor w/low-loss polyethylene dielectric, annular corrugated Cu outer conductor, type IIIA jacket. Nominal impedance 50 ohm; velocity of propagation 88%; outer diameter 1.09"; solid Cu shield. |
||
|
RG-402/U |
.141 semi-rigid line. Ag/Cu-clad .0362 center conductor with teflon dielectric & a solid Cu jacket. nominal impedance 50 Ohm; outer diameter .141" |
||
|
RG-405/U |
.086" semi-rigid line Cu-clad .0201" center conductor with teflon dialectic & solid Cu jacket.Nominal impedance 50 Ohms; outer diameter .086". |
||
|
9914F
$0.85/ft |
.405 Low Loss Coax 50 ohm, Buryflex by Davis RF |
: |
|
|
FSJ1-50A |
1/4 inch Superflex HL |
: |
|
|
FSJ4-50B |
1/2 inch Superflex Foam |
: |
Prices subject to change without notice.
Trademarks are the
properties of their owners.